Skip to main content
EPJ Techniques and Instrumentation
Download PDF

Erratum to: ‘A microfluidic AFM cantilever based dispensing and aspiration platform’

EPJ Techniques and Instrumentation volume 3, Article number: 4 (2016) Cite this article

The Original Article was published on 12 March 2015

Unfortunately, the original version of this article [1] contained an error. The PDF version does not contain the correct DOI for this article. The correct DOI is 10.1140/epjti/s40485-014-0012-4.

Reference

  1. van Oorschot R, Hector Hugo Perez G, Derks RJS, Urs S, Murali Krishna G (2015) A microfluidic AFM cantilever based dispensing and aspiration platform. EPJ Tech Instrum 2:4

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. MA3 Solutions, Eindhoven, Netherlands

    Ralph van Oorschot & Roy J. S. Derks

  2. Department of Precision and Microsystems Engineering, Delft University of Technology, Delft, Netherlands

    Hector Hugo Perez Garza, Urs Staufer & Murali Krishna Ghatkesar

Authors
  1. Ralph van Oorschot
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hector Hugo Perez Garza
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Roy J. S. Derks
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Urs Staufer
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Murali Krishna Ghatkesar
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Ralph van Oorschot or Murali Krishna Ghatkesar.

Additional information

The online version of the original article can be found under doi:10.1140/s40485-014-0012-4.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

van Oorschot, R., Garza, H.H.P., Derks, R.J.S. et al. Erratum to: ‘A microfluidic AFM cantilever based dispensing and aspiration platform’. EPJ Techn Instrum 3, 4 (2016). https://doi.org/10.1140/epjti/s40485-016-0031-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1140/epjti/s40485-016-0031-4