Skip to main content
EPJ Techniques and Instrumentation
Figure 10 | EPJ Techniques and Instrumentation

Figure 10

From: An optimized measurement chamber for cantilever array measurements in liquid incorporating an automated sample handling system

Figure 10

Differential dynamic mode signal. The plots of cantilevers 1 and 2 showed the change in resonance frequency of 225 Hz of mode 13 (noise ±30 Hz) of the cantilevers due to an increase in temperature by 0.5°C. However, the differential signal (green) showed how environmental effects such as temperature could be reduced through using a reference cantilever, as the differential signal was 0 ± 30 Hz.

Back to article page