Skip to main content
EPJ Techniques and Instrumentation
Figure 1 | EPJ Techniques and Instrumentation

Figure 1

From: Hybridised production of technetium-99m and technetium-101 with fluorine-18 on a low-energy biomedical cyclotron

Figure 1

(A) Experimental setup for irradiation of Mo metal samples on a biomedical cyclotron (1) using high yield 18F targets from BTI Targetry. White arrows indicate the position of the samples to be irradiated on the primary 18F target (2) located in position 5, vertically located above a second 18F target in position 2 (3). The top arrow is pointing to the Mo metal block attached directly behind the target, and the bottom arrow is the location of the Mo metal foils behind a Styrofoam moderator (4). (B) Close-up view of the 18F target and Mo sample configurations from the perpendicular perspective relative to the incoming beam

Back to article page